=============================================================================
 WinGPS Pro 3.3.1                                              27 march 2003
=============================================================================

In this version the following isues are addressed (compared to v3.3):

 1. The search option for detail and overview charts has been improved
    for BSB charts. To take advantage of this option all BSB charts need to
    be re-imported.

 2. The option 'show circles' will now always show the course-line, even
    when all circles are to large to show on screen.

 3. The default settings for 'Autopilot/go to' have changed. The alarm and
    turn distances are raised form 0.001 Nautical Miles to 0.1 Nautical
    Miles.

 4. Circles on a BSB chart were not shown with the correct size. This has been
    fixed.

 5. In some cases a 'Runtime Error 6 (Overflow)' occured when converting
    a track to a route. This has been fixed.

 6. The useless window that was shown just before printing a list has been
    removed.

 7. A Runtime Error 49 occured when the Windows Temp path exceeded 144
    characters and a list was printed.

 8. Printing the log has been improved. The comment field is now printed
    correctly.

 9. Margins added to BSB charts. The margin info is now read from the BSB
    chart and stored into the database when it is imported.

10. The function 'Search chart' now shows the actual search method. When you
    have chosen to search for detail charts you will read 'Search Chart
    (detail)', otherwise you will read 'Search Chart (overview)'.

11. The 'Environment'-tab of the simulation window has been made visible
    again.

12. 'Search alternate chart' function added. This function searches for an
    alternate chart that contains the GPS position. When you select another
    chart with this function, this chart will be locked. That means that
    WinGPS Pro will not search for another chart unless you choose the
    'Search chart' fuction or when the GPS position leaves the chart.

13. The minimum XTE value of the 'Track to route' function has been removed.
    Now you can enter smaller values than 0.1.

14. The proximity of a waypoint was not shown correctly in the waypoint window.
    This has been fixed.

15. Unit conversion problem solved in the log.

16. Unit conversion problem solved in the simulation window.

17. The BSB import window is more stable. It could crash on malformed paths.

18. BSB charts that presented a correct datum to WinGPS Pro, but did not have
    any calibration information are now rejected.

19. Replaced the BSB import screen with an brand new one.

20. Added support for BSB chartnames that contain single quotes (') or
    double quotes (").

21. BSB 4.0 support added.

22. A bug in the 'Select directory' window has been fixed. The selection was
    ignored when the user did not click a directory after selecting another
    drive.

23. Added support for the DBK message. Sounders that use this message are now
    supported.

24. Unit conversion problems solved with the MMB, VHW, VTG, VWR, DBK, DBS and
    DBT messages.

25. The runtime error has been fixed when you try to save a track when there
    is a error in the database.


SUPPORT
-------

 For support questions or comments about WinGPS Pro 3 you can contact
 Stentec Software.

    Address:
    --------
      Stentec Software
      Hollingerstraat 14
      8621 CA
      Heeg
      tel: +31 (0)515-44 35 15	
      fax: +31 (0)515-44 28 24

    Support:
    ---------
      helpdesk@stentec.com
      http://www.stentec.com/support
      tel: +31 (0)515-44 35 15

    Stentec on the Internet:
    ------------------------
      http://www.stentec.com
      http://www.sailsimulator.com


=============================================================================
 (c) Copyright Stentec Software 2003
=============================================================================
